Orange nitrile gloves Gripzzly

Orange nitrile gloves Gripzzly Orange are the version for everyone who works where the hand needs to be visible. Thick, powder-free nitrile gloves with an anti-slip diamond texture, in a colour that can't get lost against a dark machine, a black chassis or a dusty hall. The manufacturer is ZARYS International from Zabrze, and the product is classified as Category III Personal Protective Equipment.

Orange nitrile gloves: a colour that works alongside you

Glove colour seems like a matter of taste until someone reaches a hand between rotating parts or works in a duct lit by a single lamp. That's when it turns out orange isn't decoration, it's a signal. Gripzzly Orange stands out against almost any background found in a workshop: from the black of an engine, through the grey of a steel structure, to the beige and brown of a dirty floor.

It's the same nitrile and the same construction as the brand's other variants, just in a colour that does part of the monitoring work by itself. The hand is visible when it needs to be, and the next person at the machine knows where their colleague's hand ends. You won't write this down as a parameter in health-and-safety documentation, but every team leader understands it without explanation.

Hand visibility is a safety issue, not an aesthetic one

Orange nitrile gloves are most often chosen by facilities where oversight of hand work has procedural importance. The contrast works in three situations that, in practice, occur daily.

• Working in low light: a duct, the inside of a machine, the space under a vehicle, where a bright colour genuinely shortens orientation time.
• Team work on a single object: two people at the same mechanism can see each other's hand position.
• Checking the condition of a glove: on a light background it's easy to see where and with what the glove got dirty, making the replacement decision easier.

The last point is underappreciated. A dark glove masks an oil stain, and that can be convenient, but a light one shows plainly that contact with a substance occurred. In work with chemicals, the information "you've had contact" is worth more than aesthetics.

Diamond texture and grip where oil takes away a hand's confidence

The anti-slip diamond structure covers the entire outer surface of the palm and fingers, not just the fingertips. That's an important difference, because a tool is rarely held only with the tips of the fingers. A socket wrench is guided with the palm, a body part is supported sideways with the hand, and a fuel hose is gripped with the whole palm.

The diamond-shaped knurling breaks up the liquid film at the point of contact. On a wet, oily part, that's what decides whether the tool stays in your hand or ends up under the car. On top of that comes a detail that, in practice, saves a lot of time: Gripzzly Orange lets you use a smartphone without removing the gloves. You can check the parts catalogue, the wiring diagram, or a photo of the nameplate without taking off your hand protection.

Thick nitrile versus workshop chemistry

Nitrile is a synthetic rubber, acrylonitrile-butadiene, and its advantage in the workshop comes from chemistry, not marketing. Latex swells and loses structure on contact with petroleum derivatives, so it stops being a barrier long before any damage is visible. Nitrile keeps its resistance to oils, greases and petrol, which is why it has become the default material in service shops.

Gripzzly Orange is designed to protect hands against hazardous substances, including those contained in greases and oils. The gloves are powder-free, latex-free and thiuram-free, i.e. free of vulcanisation accelerators that, over decades, have been responsible for a large share of occupational allergic contact dermatitis.

Gripzzly Orange: technical specification

Parameter	Value
Colour	orange
Material	100% nitrile (acrylonitrile-butadiene)
Outer surface	polymerised, diamond texture over the entire surface of the palm and fingers
Inner surface	polymerised
Cuff	rolled
AQL	1.5
Classification	PPE category III, type B, per Regulation (EU) 2016/425
Sizes	S, M, L, XL, XXL
Unit packaging	50 pcs.
Bulk packaging	10 packages
Additional features	powder-free, latex-free, thiuram-free, approved for contact with food
Status	single-use, non-sterile

Standards on the box, translated into workshop language

The pictograms on the box are the one part of the description that can't be written for marketing purposes. Gripzzly Orange complies with the requirements of the following standards: EN ISO 374-1:2016+A1:2018, EN 374-2:2019, EN 374-4:2019, EN ISO 374-5:2016, EN 16523-1:2015+A1:2018, EN ISO 21420:2020 and EN 388:2016+A1:2018.

• EN ISO 374-1, type B: resistance to permeation for at least 30 minutes for a minimum of three chemicals from the test list. Type A requires six, type C only one, at ten minutes.
• EN 374-2: watertightness test, i.e. resistance to penetration through micro-holes.
• EN 374-4: material degradation under chemical exposure.
• EN ISO 374-5: protection against micro-organisms, including resistance to viruses, bacteria and fungi.
• EN 388: mechanical hazards, i.e. abrasion, cut, tear and puncture.
• EN ISO 21420: general requirements for protective gloves.
• ASTM F1671: test for resistance to blood-borne pathogens, using the Phi-X 174 bacteriophage.

AQL 1.5 is the acceptable quality level, determined by a watertightness test on a sample from the production batch. The lower the figure, the fewer non-conforming products are allowed in the tested sample. The absence of a declared AQL means the absence of any information about watertightness. The manufacturing process is run in accordance with the US FDA Quality System Regulation, BS EN ISO 9001 and EN ISO 13485.

Where orange nitrile gloves work hardest

• Construction and installation: adhesives, assembly foams, mortars, sharp edges of profiles.
• Technical service and maintenance: greases, gearboxes, work on a stopped line.
• Logistics and warehousing: work on the move, where hand visibility near transport equipment matters.
• Assembly and installation work: fast work cycle and frequent glove changes.
• Agriculture and smallholdings: operating machinery, oils, maintenance tasks.
• Car workshop: anywhere you'd rather see what you've gotten dirty with.

Orange, Black, Blue or X Long: which variant, and when

All Gripzzly variants share the same construction, the same material and the same set of tests. The choice comes down to colour and cuff length.

• Orange: when the hand needs to be visible and you want to know right away what you've gotten dirty with.
• Black: when work is heavily soiling and the glove needs to look decent right through to the end of the job.
• Blue: when contrast with the product matters, especially with food.
• X Long: when splashes reach higher than the wrist and a 300 mm cuff needs to protect the forearm.

Sizes, packaging and orders for companies

Gripzzly Orange is available in sizes from S to XXL. There's one rule for sizing: the glove should fit snugly but not stretch the skin when the fist is clenched. Too large and it bunches up under a tool, reducing precision; too small and it tires the hand and splits at the knuckles after an hour of work.

Unit packaging contains 50 pieces, the bulk carton is 10 packages, meaning 500 gloves. When planning stock, it's worth calculating actual consumption at the workstation rather than copying last year's line item from an invoice. A workstation that changes gloves after every job can get through a package in three days. And one more thing: disposable gloves are disposable. Disinfecting with alcohol and reusing them degrades the material and voids the declared protection.

Frequently asked questions about Gripzzly Orange nitrile gloves

Do orange nitrile gloves differ in durability from the black ones?

No. Orange, Black and Blue have the same construction, the same nitrile, the same diamond texture and the same set of standards. Only the pigment differs.

Is Gripzzly Orange suitable for contact with food?

Yes, the product is approved for contact with food. In a facility combining production and maintenance, this simplifies inventory management.

Do the gloves contain powder, latex or thiurams?

No. They are powder-free, without added latex, and free of thiurams, which reduces the risk of irritation and delayed-type allergic reactions.

Are Gripzzly Orange gloves sterile?

No. The product is non-sterile and intended for single use.

Can I use a touchscreen while wearing these gloves?

Yes, the design allows smartphone use without removing the gloves from your hands.

How many gloves are in a package?

Unit packaging is 50 pieces, bulk packaging is 10 unit packages.

Where to buy orange nitrile gloves Gripzzly

Gripzzly Orange gloves are available from local distributors and on sales platforms: Allegro, Morele and Ceneo. Manufacturer: ZARYS International sp. z o.o., ul. Ziemska 44, 41-803 Zabrze, tel. +48 32 376 07 50-55.